Refrigeration Units

Kide Wall mounted units – EMB Models

Contact us to confirm current stock and lead time.

Our Kide Compact commercial wall-mounted refrigeration units for small volume cold storage rooms, for use in medium and low temperature applications. All KIDE units we supply in Canada are ETL certified. Centrifugal-fan versions (KIDE EMC) for ducted installations are also available by special order from the factory.

⬇ Download Catalogue (PDF)

These compact wall-mounted systems offer:

Optional Features

Winter Kit

Rotation/failure system for two units

Synchronized defrost system for two units

Voltage protector

Anti-corrosion treatment on condenser/evaporator coil

Monitoring and control system

Time control

Humidifier external to the equipment and control (cooling)

Anti-corrosive treatment for the condenser unit

General Features:

Pre-charged with refrigerant
Hermetic compressor
Expansion by thermostatic valve
High and low-pressure control
Automatic defrosting by hot gas
Automatic evaporation of defrosting water
Cable for supply, light, and door micro switch (2.5 m)
Multi-function electronic control integrated in the front panel
Watertight light point with energy-saving LED bulb
Condensation control by pressure switch
Ceramic filter dryer
Probe alert "dirty condenser"
Isolation panel included
Designed for installation under roof
Watertight electrical panel
Air extraction fan

Temperature & Capacities

Freezer:

-15°C to -25°C

Cooler:

-5°C to 10°C

Available Capacities

3/4 HP to 3 HP

KIDE EMC compact wall-mounted refrigeration unit with centrifugal condenser fan

Centrifugal Version – KIDE EMC

Available by special order

Installing the unit indoors, or somewhere the condenser's warm air can't vent freely? The KIDE EMC is the centrifugal-fan version of our compact wall-mounted unit. Its centrifugal condenser fan lets you duct the warm exhaust air outside or to another room.

  • Same compact wall-mounted design as the EMB, for small cooler and freezer rooms
  • Centrifugal condenser fan for ducted exhaust air, up to 10 m duct length (min. duct diameter 250 mm for Series 100, 315 mm for Series 200–300)
  • Designed for indoor installation
  • Pre-charged, with hot-gas defrost and integrated electronic control
  • Exhaust air duct available as an accessory
  • ETL certified for Canada

How to order

EMC units are built to order and shipped directly from the KIDE factory. Tell us your cold room size, temperature and where the unit will be installed, and we'll confirm the right model, lead time and price.

How the exhaust duct connects

KIDE EMC ducted installation diagramThe EMC unit mounts on the cold room wall. Warm condenser air leaves the centrifugal fan through the top collar and is ducted outside the building, up to 10 metres.OUTSIDECOLD ROOMcooler or freezercold airKIDE EMCcentrifugal fan insidewarm airoutExhaust air duct — up to 10 mMin. Ø250 mm (Series 100)Min. Ø315 mm (Series 200–300)INDOOR SPACEkitchen, store or back room— no heat dumped hereIllustration only. Duct routing, size and length are confirmed for each project.

KIDE EMB Wall-Mounted Models

ModelApplicationRoom temp.Cooling capacityBTU/h (approx.)Max current
EMB1009M2ZCooler-5°C to +10°C1,405 W4,8007.1 AGet quote
EMB2011M2ZCooler-5°C to +10°C1,625 W5,5509.1 AGet quote
EMB2016M2ZCooler-5°C to +10°C2,950 W10,05010.4 AGet quote
EMB3021M2ZCooler-5°C to +10°C3,722 W12,70013.7 AGet quote
EMB1016L2ZFreezer-25°C to -15°C1,280 W4,3507.4 AGet quote
EMB2018L2ZFreezer-25°C to -15°C1,560 W5,30015.7 AGet quote
EMB3018L2ZFreezer-25°C to -15°C1,781 W6,10015.7 AGet quote
EMB3021L2ZFreezer-25°C to -15°C2,526 W8,60017.9 AGet quote

All models: 230 V / 1 Ph / 60 Hz, R-404A, hot-gas defrost, ETL Listed. Cooling capacity for coolers at 0°C room / 32°C ambient; freezers at -20°C room / 32°C ambient.

Address

Unit 24, 1110 Finch Ave W, North York, ON M3J 3M2

Whats App

+1 (647) 553-7625

Call

+1 (416) 799-6964

Help me choose.

We can give you the best offer. Fill out the form below and we will respond as soon as possible. Or call us.

    We’ll contact you to discuss your project.